Different ways to connect to the Internet


Connection via Wifi network

The first thing you will have to do is check the internet source (the router) is on. Although it may seem obvious, it is a common mistake that is made a lot, especially if a router or modem has just been configured. Therefore, it is essential that you make sure that it is turned on and that everything is plugged in correctly.

Next, you will have to verify that your device have the Wifi connection activated. Make sure your computer or mobile phone does not have the Wifi turned off before continuing. Then you will need to access your device’s settings. For this, if you are in a mobileHe goes to ‘settings’ and open it to modify the network. If you are using a computer, click the Wi-Fi icon in the toolbar to open a drop-down menu. In this menu all the available connections will appear.

Then you will have to look for the name of your Wifi network. Normally the router has a default name written on it, although this can be changed. If you have changed the name of your network, you can probably recognize it. After completing this step, you will have to enter the password of the network. This password will appear on the router, although if you don’t know it you can ask the person in charge of the network.

You will have to wait a few seconds for the computer to connect. Once you have connected to the Internet you will have to open a page in a web browser and wait for it to load. If the connection works for you, you will not have to do any more steps. However, your computer may not be able to connect to the Connection wireless. Some of the most common problems are that the Internet is too slow, or that the network is out of reach.

You may also like...

Leave a Reply